Loading

Chassis Front Rear Drivetrain Differentials Suspension Shocks Body Electronics Chemicals Tools Accessories

PREMIUM COMPETITION CHASSIS

The SSX-823 is the latest evolution of the accomplished SSX-8X design, which holds multiple national and international titles to its name. Every component of the SSX-823 has been scrutinized and reevaluated by our engineers to result in a Pan car-type chassis without equals. Countless days of rigorous testing by our talented test drivers and engineers have led to this specific design of the SSX-823, where weight savings have been prioritized, a revised chassis flex system guarantees perfect handling, and where enhanced drivetrain components have been used to better distribute available motor power. All components of the SSX-823 are manufactured from the highest quality composite nylon, carbon fiber, aluminium, and various metals for an extreme level of precision and consistency. In summary, the SSX-823 is an outstanding 1/8 on-road race car. The competition has already been stunned at initial race events, where the SSX-823 prototypes immediately took the top places.

A winner straight from the box, the Team Corally SSX-823 is designed by racers for racers!

DESIGNED IN BELGIUM

The SSX-823 is a competition race car kit, designed by a talented team of designers and engineers based in Olen, Belgium. Their knowledge, experience, and passion for excellence have been fully applied to the creation of this masterpiece. The design directive was clear-no compromises in corner speed, acceleration, adaptability to various tracks, or ease of maintenance. Simple yet innovative touches like access portals that provide easy access for wrenches or other tools allow adjustments or disassembly without affecting surrounding sub-assemblies. This thoughtful approach results in a race car that is not only a pleasure to drive but enjoyable to set up and maintain. The SSX-823 took the successful SSX8 platform and made it even better.

Supreme expression of perfection pushed to the limit!
* Prototype parts shown, specification may
be subject to change.
Features

LOW CENTER OF GRAVITY DESIGN WITH PERFECT BALANCE

With the SSX-823, a low center of gravity design was a primary focus point. Everything on the chassis was kept as low as possible. For example, front bulkheads and the motor are positioned lower in the chassis. However, as most racers know, a low center of gravity is not the most critical design aspect. The proper distribution of weight across the chassis, overall balance around the chassis centerline and the proper weight at ride height to achieve ideal chassis balance front-to-rear and side-to-side are just as critical. The SSX-823 excels in this task to deliver a nicely balanced pressure on all 4 corners of the car. To achieve this chassis balance, Team Corally recommends using 2S “long” hardcase LiPo batteries for the proper weight and balance of the car. (Batteries from 300 - 330gr each)

AEROSPACE QUALITY CARBON FIBER

Team Corally employs only top grade aerospace-certified quasi-isotropic carbon graphite material to produce chassis components for the SSX-823. Each and every part has been thoughtfully and meticulously engineered to provide the desired flex and strength at each specific location on the chassis, all while reducing weight. Every single gram of weight savings converts directly into improved acceleration and corner speed.

ADJUSTABLE CHASSIS FLEX

Robust carbon chassis side braces are located on both sides of the SSX-823 chassis plate and mounted using four aluminium posts on each side. Loosening to top screws increases lateral chassis flex, which improves handling on loose or bumpy racetracks. For smooth, high-bite surfaces a stiffer, more rigid approach offers quicker changes of direction and corner exit traction.

DUAL 2S LIPO BATTERY TRAY

Development and testing have determined that the best setup is two regular-length 2S hardcase Lipo packs placed side-by-side. The battery tray dimensions (94.5mm wide and 140mm long) are intended for use with batteries no more than 28mm tall and weighing between 300-330g each. Should taller packs be desired, the electronics tray can be raised (using spacers, not included) at a slight decrease in handling.

Team Corally offers two perfect battery packs for the SSX-823 (C-49523 and C-49623), and both LiPo and LiHV packs are suitable depending on local rules.

RACING FEATURES

The SSX-823 offers thoughtful details that separate great designs from good designs.

• Dual Fan Mounting Plate: Designed to secure two 30mm cooling fans to maximize motor performance and reliability.
• Rear Nerf Wings: Protect rear tires, spur gear, and axle in case of a racing incident.
• Transponder Mount: Located strategically in the forward part of the chassis and specifically-designed for current MyLaps transponders.
• Grab Handle: A convenient two-finger handle allows convenient grasp of the car without damage or creasing of the bodyshell.
• Electronic Mount Plate: The ESC and RX are perfectly positioned for balance and ease of access thanks to the SSX-823’s mounting platform.

UNIVERSAL BODY MOUNTING

The SSX-823 body mounting system allows for convenient fitment of a wide range of racing bodies, including today’s high-downforce, low-nose designs. The front body mounts are located on the optimized bumper to eliminate any negative influence on front suspension travel and deliver the lowest possible body mounting position and front wheel protection. The rear mount provides three distinct body post locations for ideal downforce, with additional rear body support offered by outboard adjustable nylon post bolts.

OPTIMIZED FRONT SUSPENSION

The front suspension on the SSX-823 has been completely re-designed. All components have been lightened considerably while retaining the strength and rigidity needed to create a precisely steerable front end. The front bulkheads are vertically split and oriented lower compared to the SSX-8. As a result, the center of gravity is lower, the axle centerline is lower, the lowest aerodynamic bodies are able to be mounted extraordinarily low on the chassis. The amount of lateral (pendulum) movement of the front suspension can easily be changed by using 2 adjustment nuts. Small springs or O-rings can be interchanged to obtain the perfect level of pendulum travel for any track conditions. The pivot balls used in the front hubs are standard size and mounted in precision aluminum perches. Because the body mount on the SSX-823 is secured to the bumper independently of the front suspension, the front end pendulum movement is not limited in any manner by the body.

ADJUSTABLE FRONT PENDULUM EFFECT

The front end assembly of the SSX-823 is infinitely adjustable thanks to the interchangeable use of springs or O-rings. Track surface and grip levels will dictate the optimum choice and setting for this feature.

PRECISION PIVOT-BALL FRONT END

The SSX-823 uses the competition-proven pivot ball style front steering blocks, allowing for precise, simple, and convenient adjustments for both track width and camber. A precisely machined steel pivot ball is securely nestled in an aluminum perch with an additional jam nut against the upper and lower mounting blocks for added security. Ride height and roll centers are easily adjustable by flipping the aluminum mounting blocks.

CONVENIENT CASTER ADJUSTMENT

Adjusting caster is one of the most effective handling adjustments for any R/C car, with increased caster aiding in corner entry speed, while decreased caster improves mid-corner and corner exit performance. Making adjustments to the SSX-823 between 5, 10, or 15 degrees caster is achieved easily by removal and re-installation of four screws.

ADJUSTABLE ACKERMANN

The simple yet innovative adjustable Ackermann feature on the SSX-823 allows quick and precise adjustments to this useful tuning aid. Ackermann effect can be increased or decreased, controlling the angle of both front wheels as they enter a turn. Sensitivity and corner speed can be optimized with the correct Ackermann setting, which can be adjusted simply with three screws.

QUICK RELEASE FRONT AXLE

Team Corally designers have not only thought about outright performance, they have also made the SSX-823 easy to maintain for today’s racer. To allow for quick maintenance of the front drivetrain or to quickly replace the front an axle, the front bulkheads are designed to split vertically. By simply loosening a few screws, the entire front axle lifts out of the car without need to disassemble other critical parts or touch your chassis setup.

Extra lightweight bulkheads are machined from 7075 T6 aluminum, and whereas Where the SSX-8X used 8mm wide aluminum front bulkheads, the SSX-823 features ultra-lightweight 7075 T6 aluminum bulkheads with a reduced 6mm width. As you can see, each and every part has been optimized to deliver maximum strength while still reducing weight. All parts are hard anodized for increased surface strength and feature an attractive black matte finish, creating a chassis that is a pleasure to look at.

RIGID REAR END ASSEMBLY

The SSX-823 achieves an optimized stiffness thanks to a central stiffener plate. Mounted securely just in front of the rear bulkheads/motor mount area, the front of the plate is supported by a silicone bushing and adjusted easily with a locknut, allowing the chassis to flex laterally without being adversely affected by the battery packs.

QUICK RELEASE REAR AXLE

Team Corally designers have not only thought about outright performance, they have also made the SSX-823 easy to maintain for today’s racer. To allow for quick maintenance of the rear drivetrain or to quickly replace the axle, rear bulkheads are designed to split vertically. By simply loosening a few screws, the entire axle assembly conveniently lifts out of the car without need to disassemble other critical parts or touch your chassis setup.

Extra lightweight bulkheads are machined from 7075 T6 aluminum, and whereas Where the SSX-8X used 8mm wide aluminum rear bulkheads, the SSX-823 features ultra-lightweight 7075 T6 aluminum bulkheads with a reduced 6mm width. As you can see, each and every part has been optimized to deliver maximum strength while still reducing weight. All parts are hard anodized for increased surface strength and feature an attractive black matte finish, creating a chassis that is a pleasure to look at.

EXTRA SMOOTH, LOW-FRICTION DRIVE BELT

A 6mm low-friction drive belt is a critical component of the SSX-823’s efficient, quiet, and buttery-smooth drivetrain. In addition to the simple yet efficient ball bearing-equipped rear belt tensioner, the carbon front belt guard assures proper belt/pulley orientation and securement.

PRECISION FRONT CVD DRIVESHAFTS, AXLES, AND DRIVE CUPS

The front drive system of the SSX-823 arrives fully-featured with exceptionally precise, high-quality S2 spring steel CVD shafts. Allowing for a more efficient transfer of power by reducing friction under steering angle loads, they are infinitely more efficient compared to traditional dogbones. Specifically hardened for low friction and minimal wear, CVD system used by Team Corally is also 20% lighter than used on the previous model. Combined with lightweight, hardened steel outdrive cups, handling and acceleration are improved thanks to a reduction in rotating weight.

FRONT ONE WAY

The one-piece front drive axle on the SSX-823 contains internal, aerospace-quality precision one-way bearings on each side to accept the outdrive cups. The front one-way assembly is one of the more critical assemblies on a 1/8 scale pan car, as off-power the front wheels must rotate as frictionless as possible in order to optimize traction and corner entry speed.

32DP SPUR GEAR

The SSX-823 features a composite, 32 pitch spur gear in place of the traditional Mod 1 system. This innovative approach allows for a smaller diameter spur gear to increase ground clearance and reduce the risk of damage from debris or corner curbs. The use of 32DP allows for a wide range of possible gear rations to fine-tune the speed, acceleration, and run time to your specific racetrack. The table below illustrates recommended options based on your specific motor choice.

RECOMMENDED 32DP MOTOR PINION
For Brushless Motor >2200KV
Pinion - 15 Teeth
C-72515
Pinion - 16 Teeth
C-72516
For Brushless Motor 2000 - 2200KV
Pinion - 17 Teeth
C-72517
Pinion - 18 Teeth
C-72518
For Brushless Motor 1800 - 2000KV
Pinion - 19 Teeth
C-72519
Pinion - 20 Teeth
C-72520

COMPOSITE AXLE BEARING INSERTS

Precision nylon composite bearing inserts are used on both front and rear axles of the SSX-823. This proven method delivers improved bearing/axle alignment and protection for the aerospace-quality 12 x 21 x 5 ball bearings to ensure a silky-smooth, drag-free drivetrain.

ACCEPTS INDUSTRY-STANDARD FRONT AND REAR FOAM TYRES

The SSX-823 accepts industry-standard, quick-change 1/8 scale nylon wheels and foam tires for the ultimate in convenience, product availability, and tuning options.

Team Corally offers specific, pre-trued tires for the SSX-823.

* Equipment listed is recommended by Team Corally designers and team drivers.
Kit

Revoc ESC

The Team Corally Revoc II XTR 160 is ideal for sensored or sensorless motors and any type of lithium battery. Able to handle up to 160 amp draw, it’s ideal for the SSX-823 and other ⅛ scale vehicles using 2S to 6S power! Every setting is fully adjustable using the TC Smart Box if you wish to fully tune the Revoc Pro-160 for maximum performance on the track.

The Team Corally Revoc II XTR 160 is manufactured with the highest grade components to ensure the lowest possible internal resistance, resulting in optimised performance on the track. The competition racer will get everything they need for pro-level racing, whether racing on-road or off-road. Get the best control with the Revoc Pro-160!

Revoc II XTR 160 "Racing Factory" - Black - Red Color
C-53010
Revoc II XTR 160 "Racing Factory" - Black - Silver Color
C-53011
ESC Ultra High Speed Cooling Fan 30mm
C-53110-1
TC Smart Box - Programbox for Cerix
C-53008

Motor

  • Spec
  • Turns: 5,5 turns
  • Motor Limit: 1950 KV
  • Motor Shaft ø: 5 mm
  • Nr of Cells: 2-4s
  • Max. Current (A): 97 a
  • Motor Length: 67,8 mm
  • Motor Ø: 40,8 - 42 mm
  • Sensor Ports: 1 Sensor Ports
  • Watt: 440
DYNOSPEED VELOX 805
C-61302

Fans

Due to the extreme power of the lithium batteries, the brushless motors and controllers, all these electric components become pretty hot in normal conditions, up to very hot on sunny days.

All heat development goes hand in hand with power loss, so proper cooling of all these components in the car are extremely important. The Team Corally high speed cooling fans have been specially designed to guarantee maximum heat dissipation. Our cooling fans have an airflow that is up to 50% higher than that of normal fans of the same size.

The quality and the special way in which these fans are constructed also means that the Team Corally high speed fans have a longer lifespan and are more resistant to the impacts that the cars have to cope with.

The high speed cooling fans are available with a special connector to plug directly into the controller or with a BEC plug which can be plugged into a free channel of the receiver to power the fan. No more excuse not to cool your electronics.

Ultra High Speed Cooling Fan TF-30 - 30mm - Color Black / Red
C-53110-1
Ultra High Speed Cooling Fan TF-30 - 30mm - Color Black / Silver
C-53110-2
Ultra High Speed Cooling Fan TF-40 - 40mm - Color Black / Red
C-53112-1
Ultra High Speed Cooling Fan TF-40 - 40mm - Color Black / Silver
C-53112-2

High Speed lCG Servo

For ultimate control, Team Corally engineers have developed a range of servos with the racer in mind, for ultimate precision, digital control and supreme reliability. The low-profile CS-4014 is the ideal match for the SSX-823! Standard size servos will also fit in the SSX-823, depending on the body fit. Click the See More link below to read all about Team Corally racing servos!

  • features
  • Full CNC machined alloy case
  • High Voltage 6.0 - 8.4V
  • Titanium / steel gears
  • Ball Raced
  • Coreless motor
  • Ultra high speed and torque
  • Water resistant
CS-5245 HV Mega Torque Servo - Steel Gears
C-52005
CS-5226 HV High Torque Servo - Titanium Gears
C-52001
CS-5016 HV High Speed Servo - Titanium Gears
C-52000

Battery

Team Corally racing batteries are manufactured to the highest spec for maximum performance. Trusted by pro racers around the world, these batteries are approved by major racing organisers for use in sanctioned National competition. A full range of batteries, from sport to pro, are available. Click the See More button below for full details.

PREMIUM GREASES

Just like your automobile needs specialized fluids and lubricants, so do R/C model cars. Team Corally offers an impressive lineup of premium greases and lubricants that are specifically-formulated to keep your vehicle running at its best!

LITHIUM GREASE
C-82700
COPPER GREASE
C-82701
SHOCK-O-RING GREASE
C-82702
BALL DIFF GREASE
C-82703

SILICONE OILS

Team Corally - Ultra pure silicone shock and differential oils are manufactured and bottled in Europe. Each production batch is rheometer calibrated to ensure the highest possible consistency and quality from batch to batch. The viscosity of the oils is rated in industry proven CST or WT values.

DIFF SYRUP - ULTRA PURE SILICONE 2k-2000k CST
DETAILS
SHOCK OIL - ULTRA PURE SILICONE 100-1000 CST
DETAILS
SHOCK OIL - ULTRA PURE SILICONE 10-75 WT
DETAILS

Tyre Juice Traction Compound

Team Corally Tyre Juice have been developed by racing professionals to give the maximum amount of traction on a variety of surfaces. Developed separately for RC racing tyres, different Tyre Juice compounds are available for competitive racing in a variety of strengths.

ASPHALT RUBBER
C-13760
ASPHALT FOAM
C-13761
CARPET RUBBER
C-13762
CARPET FOAM
C-13763

RC Car Tool Set

Enjoy the economical convenience of Team Corally's innovative new 16 piece RC tool set. Perfect for maintaining, repairing, or customizing your vehicle, this comprehensive set comes complete with a compact, take-anywhere carrying case. It's the last tool set you'll ever need!

  • included
  • 1.5, 2.0, 2.5, and 3.0mm machined hex drivers
  • 5.5 and 7mm nutdrivers
  • stamped metal multi-tool
  • 5mm allen key
  • multi-purpose shock pliers
  • small parts tray
  • pinion caddy
  • shock tray
  • cast four-way wrench
  • carrying case

Team Corally Pro Tools

A complete tool system featuring lightweight, knurled and anodized handles is available from Team Corally for all your kit building, repair and pit maintenance needs.

Team Corally FACTORY PRO Tools
HEX DRIVER
Hex 1.5 mm
C-16130
Hex 2.0 mm
C-16131
Hex 2.5 mm
C-16132
Hex 3.0 mm
C-16133
PHILIPS SCREWDRIVER
PH 3.0 mm
C-16150
PH 4.0 mm
C-16151
PH 5.0 mm
C-16152
PH 5.8 mm
C-16153
NUT DRIVER
Nut M2 4.0 mm
C-16160
Nut M3 5.5 mm
C-16161
Nut M4 7.0 mm
C-16162
Nut M5 8.0 mm
C-16163
FLAT SCREWDRIVER
Flat 3.0 mm
C-16140
Flat 4.0 mm
C-16141
OTHER TOOLS
Shock Pliers
C-16300
Shape-It Scissor - Straight
C-16040
Shape-It Scissor - Curved
C-16041

Precision Racing Gears

The 32DP pinion gears available for the SSX-823 are made from the highest quality metals available, precision cut by CNC machine from industrial grade steel for extra-long life in the most demanding racing situations. You can be sure that when you’re racing for the top position on the podium, these parts will not let you down!

Pinion Caddy 48DP - 21 Pinions - ø 3.17mm
C-16206
64 dp pionion
alu 7075 hard coated
hardened steel

Multi tray

The Team Corally Ultra Tray is a parts tray and multi-use pit helper, all in one super-handy tool! It’s CNC machined from 10mm thick billet aluminium for an instant pro look to your pit area. The deep tray sections help you organize screws, washers and all of the small parts that come off your car. A handy ruler helps you measure shock rebound to match your shocks, and you can use it to measure screws and bolts. Super-convenient soldering jigs hold various plugs and wires to make soldering jobs extra-easy and quick.

CNC Machined aluminium - Red Color
C-16306
CNC Machined aluminium - Titanium Color
C-16305

pit light

Team Corally's aluminum LED Folding Pit Light features convenient touch sensitive controls with three adjustable light color modes and six adjustable brightness/dimming levels for a wide range of lighting choices. Using 32 energy efficient and high power LEDs bulbs, this pit light is ideal for general illumination as well as detailed mechanic work. Plus, it uses only 11 watts of power or less to provide the light equivalent of a 100 watt incandescent bulb.

Dimmable - Motion Sensor - Parts Tray - Red
C-16310
Dimmable - Motion Sensor - Parts Tray - Black
C-16311

SSX-823 Foam Tyres

Attack Racing Tyres are available in a range of shore/hardness ratings from 30 to 35 (Front) and 32 or 35 (Rear), these are the ideal way to get your car on the track quickly without the need for a tyre truer. These wheels feature a custom dual-spoke design in a cool dark metallic silver colour, and are suitable for use on all ⅛ scale on-road cars. Click the See More button to find out more about Attack Racing Tyres!

front foam tyres
30 SHORE
C-14713-30
32 SHORE
C-14713-32
35 SHORE
C-14713-35
rear foam tyres
32 SHORE
C-14718-32
35 SHORE
C-14718-35

gallery

Detailed, high-resolution photos to show you everything about the SSX-823. Download wallpapers for your phone or computer and all the coolest Team Corally graphics!

support

Get Team Corally Racing Team SSX-823 setup sheets for instant trackside assistance. You can also download manuals, instructions and other documentation here.

video

Exclusive videos will be here soon from the Team Corally pro team to help with kit building, race tuning, maintenance and more. (Coming soon!)